3D printing and other manufacturing techniques
— 30 November 20213D printing as an additive manufacturing technique continues to be classified as an innovative manufacturing
Continue Reading ...
-
-
Universal lathe, construction and possible machining – basics
— 30 April 2021The history of the lathe dates back to 4,000 BC. to the so-called string drills. In the Middle Ages,
Continue Reading ... -
Determining the machining time – main time
— 28 June 2019The main time (tg – main machine time or main manual time) is a component of the standard of technological
Continue Reading ... -
Shaft technology – technological process – operation 30
— 16 January 2019Operation 30 is the penultimate operation of shaping the workpiece. The general technological process
Continue Reading ... -
Shaft technology – technological process – operation 20
— 6 January 2019Shaft technology also means machining holes, mainly axial but also lateral holes. In the case of this
Continue Reading ... -
Shaft technology – technological process – operation 10
— 28 December 2018Operation 10 as part of each technological process is so-called first operation. The convention of numbering
Continue Reading ... -
Shaft technology – technological process
— 9 December 2018The shaft technology is a very popular subject in the process of technological education. There is an
Continue Reading ... -
Milling – selection of machining parameters
— 10 January 2018Milling in relation to turning is characterized by much greater variation. The following are the basic
Continue Reading ... -
Turning – selection of machining parameters
— 7 November 2017Machining parameters, including turning parameters (fig. 1), are a challenge for every technologist.
Continue Reading ... -
Technological process of the sleeve, part 6 – grinding
— 6 November 2016Previous post in the series: Technology of the sleeve, part 5 – boring. Technological operation
Continue Reading ...
